Stainless Steel Deep Groove Ball Bearings

Open

Sealed

Shielded

Stainless steel ball bearings can resist corrosion caused by moisture and other individual medium. The stainless deep groove ball bearings and standard deep groove ball bearings made of chrome steel have the same deep groove raceway. The fit between raceway and balls is very well. Even under the condition of high speed, stainless steel deep groove ball bearings not only bear radial load, but also can withstand two-way axial load.

Features

The running characteristics of stainless steel deep groove ball bearings is the same as general chrome steel deep groove ball bearings, but its load capacity is low.
The Austenitic stainless steel bearings almost have no magnetism, so they are food grade & medical grade stainless steel bearings.
The inner race diameter scope of our stainless steel bearings is between 2 to 500 mm, including metric and inch (imperial) size miniature bearings, large thin section bearings. We can also provide open and sealed designs.

AISI440C

AISI304

AISI316L

Stainless Steel Balls

AISI440C

AISI304

AISI316L

Stainless Steel Balls

Product Number	Diameter Tolerance	Hardness	Maximum Temperature
1/16″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
5/64″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
3/32″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
7/64″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
1/8″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
9/64″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
5/32″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
3/16″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
7/32″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
1/4″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
9/32″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
5/16″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
11/32″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
3/8″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
7/16″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
1/2″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
9/16″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
5/8″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
11/16″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
3/4″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
13/16″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
7/8″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
15/16″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
1″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
1 1/16″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
1 1/8″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
1 3/16″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
1 1/4″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
1 3/8″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
1 1/2″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
2″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
3″	-0.0005″ to 0.0005″	HRC60-65	800° F \| 427℃
1mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
1.5mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
2mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
2mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
2.5mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
3mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
3.5mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
4mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
5mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
6mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
7mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
8mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
9mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
10mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
12mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
13mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
14mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
15mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
16mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
18mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
24mm	-0.0025mm to 0.0025mm	HRC60-65	800° F \| 427℃
AISI 304 Stainless Steel Balls
Product Number	Diameter Tolerance	Hardness	Maximum Temperature
1/16″	-0.0005″ to 0.0005″	Rockwell C25 (Hard)	800° F \| 427℃
3/32″	-0.0005″ to 0.0005″	Rockwell C25 (Hard)	800° F \| 427℃
1/8″	-0.0005″ to 0.0005″	Rockwell C25 (Hard)	800° F \| 427℃
5/32″	-0.0005″ to 0.0005″	Rockwell C25 (Hard)	800° F \| 427℃
3/16″	-0.0005″ to 0.0005″	Rockwell C25 (Hard)	800° F \| 427℃
7/32″	-0.0005″ to 0.0005″	Rockwell C25 (Hard)	800° F \| 427℃
1/4″	-0.0005″ to 0.0005″	Rockwell C25 (Hard)	800° F \| 427℃
9/32″	-0.0005″ to 0.0005″	Rockwell C25 (Hard)	800° F \| 427℃
5/16″	-0.0005″ to 0.0005″	Rockwell C25 (Hard)	800° F \| 427℃
11/32″	-0.0005″ to 0.0005″	Rockwell C25 (Hard)	800° F \| 427℃
3/8″	-0.0005″ to 0.0005″	Rockwell C25 (Hard)	800° F \| 427℃
7/16″	-0.0005″ to 0.0005″	Rockwell C25 (Hard)	800° F \| 427℃
1/2″	-0.0005″ to 0.0005″	Rockwell C25 (Hard)	800° F \| 427℃
5/8″	-0.0005″ to 0.0005″	Rockwell C25 (Hard)	800° F \| 427℃
3/4″	-0.0005″ to 0.0005″	Rockwell C25 (Hard)	800° F \| 427℃
1″	-0.0005″ to 0.0005″	Rockwell C25 (Hard)	800° F \| 427℃
1 1/4″	-0.001″ to 0.001″	Rockwell C25 (Hard)	800° F \| 427℃
1 1/2″	-0.001″ to 0.001″	Rockwell C25 (Hard)	800° F \| 427℃
1 3/4″	-0.001″ to 0.001″	Rockwell C25 (Hard)	800° F \| 427℃
2″	-0.001″ to 0.001″	Rockwell C25 (Hard)	800° F \| 427℃
2.5mm	-0.0127mm to 0.0127mm	Rockwell C25 (Hard)	800° F \| 427℃
3mm	-0.0127mm to 0.0127mm	Rockwell C25 (Hard)	800° F \| 427℃
3.5mm	-0.0127mm to 0.0127mm	Rockwell C25 (Hard)	800° F \| 427℃
4mm	-0.0127mm to 0.0127mm	Rockwell C25 (Hard)	800° F \| 427℃
5mm	-0.0127mm to 0.0127mm	Rockwell C25 (Hard)	800° F \| 427℃
6mm	-0.0127mm to 0.0127mm	Rockwell C25 (Hard)	800° F \| 427℃
7mm	-0.0127mm to 0.0127mm	Rockwell C25 (Hard)	800° F \| 427℃
8mm	-0.0127mm to 0.0127mm	Rockwell C25 (Hard)	800° F \| 427℃
10mm	-0.0127mm to 0.0127mm	Rockwell C25 (Hard)	800° F \| 427℃
12mm	-0.0127mm to 0.0127mm	Rockwell C25 (Hard)	800° F \| 427℃
AISI 316L Stainless Steel Balls
Product Number	Diameter Tolerance	Hardness	Maximum Temperature
Product Number	Diameter Tolerance	Hardness	Maximum Temperature
1/16″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
3/32″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
1/8″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
5/32″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
3/16″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
7/32″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
1/4″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
5/16″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
3/8″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
7/16″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
1/2″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
9/16″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
5/8″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
3/4″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
7/8″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
1″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
1 1/8″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
1 1/4″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
1 3/8″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
1 1/2″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
2″	-0.001″ to 0.001″	Rockwell B90	800° F \| 427℃
2.5mm	-0.013mm to 0.013mm	Rockwell B90	800° F \| 427℃
3mm	-0.013mm to 0.013mm	Rockwell B90	800° F \| 427℃
3.5mm	-0.013mm to 0.013mm	Rockwell B90	800° F \| 427℃
4mm	-0.013mm to 0.013mm	Rockwell B90	800° F \| 427℃
5mm	-0.013mm to 0.013mm	Rockwell B90	800° F \| 427℃
6mm	-0.013mm to 0.013mm	Rockwell B90	800° F \| 427℃
7mm	-0.013mm to 0.013mm	Rockwell B90	800° F \| 427℃
8mm	-0.013mm to 0.013mm	Rockwell B90	800° F \| 427℃
10mm	-0.013mm to 0.013mm	Rockwell B90	800° F \| 427℃
12mm	-0.013mm to 0.013mm	Rockwell B90	800° F \| 427℃

Stainless Steel Deep Groove Ball Bearings

Features

address

Yandian Industrial Park, Linqing City, Liaocheng City, Shandong Province, China

email

mike@machine-bearings.com

Quick Links

product

Open
Product Number	Seal Type	Bore Dia	Outer Dia	Width	Dynamic	Static	Max
		(d)	(D)	(B)	radial	radial	Speed
					(Newtons)	(Newtons)	(X1000 RPM)
SR133	Open	0.0938″ \| 2.381 mm	0.1875″ \| 4.763 mm	0.0625″ \| 1.588 mm	144.153	44.046	85.5
SR1-5	Open	0.0938″ \| 2.381 mm	0.3125″ \| 7.938 mm	0.1094″ \| 2.779 mm	424.458	128.133	63.9
SR144	Open	0.125″ \| 3.175 mm	0.25″ \| 6.35 mm	0.0937″ \| 2.38 mm	216.234	68.076	72
SR2-5	Open	0.125″ \| 3.175 mm	0.3125″ \| 7.938 mm	0.1094″ \| 2.779 mm	428.454	128.133	60.3
SR2	Open	0.125″ \| 3.175 mm	0.375″ \| 9.525 mm	0.1562″ \| 3.967 mm	484.515	156.168	60.3
SR2-6	Open	0.125″ \| 3.175 mm	0.375″ \| 9.525 mm	0.1094″ \| 2.779 mm	488.52	164.178	56.7
SR2A	Open	0.125″ \| 3.175 mm	0.5″ \| 12.7 mm	0.1719″ \| 4.366 mm	488.52	164.178	56.7
SR155	Open	0.1563″ \| 3.969 mm	0.3125″ \| 7.938 mm	0.1094″ \| 2.779 mm	276.291	108.117	56.7
SR156	Open	0.1875″ \| 4.763 mm	0.3125″ \| 7.938 mm	0.1094″ \| 2.779 mm	276.291	108.117	56.7
SR166	Open	0.1875″ \| 4.763 mm	0.375″ \| 9.525 mm	0.125″ \| 3.175 mm	544.581	196.209	54
SR3	Open	0.1875″ \| 4.763 mm	0.5″ \| 12.7 mm	0.1562″ \| 3.967 mm	997.065	352.377	45
SR3A	Open	0.1875″ \| 4.763 mm	0.625″ \| 15.875 mm	0.196″ \| 4.978 mm	1133.208	448.479	40.5
S1601	Open	0.1875″ \| 4.763 mm	0.6875″ \| 17.463 mm	0.25″ \| 6.35 mm	540	198	5.4
SR168	Open	0.25″ \| 6.35 mm	0.375″ \| 9.525 mm	0.125″ \| 3.175 mm	284.301	124.137	50.4
SR188	Open	0.25″ \| 6.35 mm	0.5″ \| 12.7 mm	0.125″ \| 3.175 mm	828.882	320.346	45
SR4	Open	0.25″ \| 6.35 mm	0.625″ \| 15.875 mm	0.196″ \| 4.978 mm	1133.208	448.479	40.5
S1602	Open	0.25″ \| 6.35 mm	0.6875″ \| 17.463 mm	0.25″ \| 6.35 mm	571.5	216	5.4
SR4A	Open	0.25″ \| 6.35 mm	0.75″ \| 19.05 mm	0.2188″ \| 5.558 mm	1785.906	644.688	38.7
SR1810	Open	0.3125″ \| 7.938 mm	0.5″ \| 12.7 mm	0.1562″ \| 3.967 mm	416.448	200.214	43.2
S1603	Open	0.3125″ \| 7.938 mm	0.875″ \| 22.225 mm	0.2812″ \| 7.142 mm	670.5	279	5.4
S1605	Open	0.3125″ \| 7.938 mm	0.9062″ \| 23.017 mm	0.3125″ \| 7.938 mm	670.5	283.5	5.4
S1604	Open	0.375″ \| 9.525 mm	0.875″ \| 22.225 mm	0.2812″ \| 7.142 mm	675	288	5.4
SR6	Open	0.375″ \| 9.525 mm	0.875″ \| 22.225 mm	0.2188″ \| 5.558 mm	2550.726	1025.1	34.2
S1606	Open	0.375″ \| 9.525 mm	0.9062″ \| 23.017 mm	0.3125″ \| 7.938 mm	675	288	5.4
S1614	Open	0.375″ \| 9.525 mm	1.125″ \| 28.575 mm	0.375″ \| 9.525 mm	1026	468	5.4
S1607	Open	0.4375″ \| 11.113 mm	0.9062″ \| 23.017 mm	0.3125″ \| 7.938 mm	913.5	387	5.4
S1615	Open	0.4375″ \| 11.113 mm	1.125″ \| 28.575 mm	0.375″ \| 9.525 mm	1030.5	477	5.4
S1620	Open	0.4375″ \| 11.113 mm	1.375″ \| 34.925 mm	0.4375″ \| 11.113 mm	1521	720	5.4
S1616	Open	0.5″ \| 12.7 mm	1.125″ \| 28.575 mm	0.375″ \| 9.525 mm	1035	405	5.4
SR8	Open	0.5″ \| 12.7 mm	1.125″ \| 28.575 mm	0.25″ \| 6.35 mm	1034.1	459.9	28.8
S1621	Open	0.5″ \| 12.7 mm	1.375″ \| 34.925 mm	0.4375″ \| 11.113 mm	1530	733.5	5.4
S1622	Open	0.5625″ \| 14.288 mm	1.375″ \| 34.925 mm	0.4375″ \| 11.113 mm	1539	742.5	5.4
S1623	Open	0.625″ \| 15.875 mm	1.375″ \| 34.925 mm	0.4375″ \| 11.113 mm	1548	751.5	5.4
SR10	Open	0.625″ \| 15.875 mm	1.375″ \| 34.925 mm	0.2812″ \| 7.142 mm	1426.5	661.5	22.5
S1628	Open	0.625″ \| 15.875 mm	1.625″ \| 41.275 mm	0.5″ \| 12.7 mm	1890	985.5	5.4
S1633	Open	0.625″ \| 15.875 mm	1.75″ \| 44.45 mm	0.5″ \| 12.7 mm	1890	1008	5.4

Open
Product Number	Seal Type	Bore Dia	Outer Dia	Width	Dynamic	Static	Max
		(d)	(D)	(B)	radial	radial	Speed
					(Newtons)	(Newtons)	(X1000 RPM)
S304-R133	Open	0.0938″ \| 2.381 mm	0.1875″ \| 4.763 mm	0.0625″ \| 1.588 mm	48.051	14.682	33.25
S304-R1-5	Open	0.0938″ \| 2.381 mm	0.3125″ \| 7.938 mm	0.1094″ \| 2.779 mm	141.486	42.711	24.85
S304-R144	Open	0.125″ \| 3.175 mm	0.25″ \| 6.35 mm	0.0937″ \| 2.38 mm	72.078	22.692	28
S304-R2-5	Open	0.125″ \| 3.175 mm	0.3125″ \| 7.938 mm	0.1094″ \| 2.779 mm	142.818	42.711	23.45
S304-R2	Open	0.125″ \| 3.175 mm	0.375″ \| 9.525 mm	0.1562″ \| 3.967 mm	161.505	52.056	23.45
S304-R2-6	Open	0.125″ \| 3.175 mm	0.375″ \| 9.525 mm	0.1094″ \| 2.779 mm	162.84	54.726	22.05
S304-R2A	Open	0.125″ \| 3.175 mm	0.5″ \| 12.7 mm	0.1719″ \| 4.366 mm	162.84	54.726	22.05
S304-R155	Open	0.1563″ \| 3.969 mm	0.3125″ \| 7.938 mm	0.1094″ \| 2.779 mm	92.097	36.039	22.05
S304-R156	Open	0.1875″ \| 4.763 mm	0.3125″ \| 7.938 mm	0.1094″ \| 2.779 mm	92.097	36.039	22.05
S304-R166	Open	0.1875″ \| 4.763 mm	0.375″ \| 9.525 mm	0.125″ \| 3.175 mm	181.527	65.403	21
S304-R3	Open	0.1875″ \| 4.763 mm	0.5″ \| 12.7 mm	0.1562″ \| 3.967 mm	332.355	117.459	17.5
S304-R3A	Open	0.1875″ \| 4.763 mm	0.625″ \| 15.875 mm	0.196″ \| 4.978 mm	377.736	149.493	15.75
S304-1601	Open	0.1875″ \| 4.763 mm	0.6875″ \| 17.463 mm	0.25″ \| 6.35 mm	180	66	2.1
S304-R168	Open	0.25″ \| 6.35 mm	0.375″ \| 9.525 mm	0.125″ \| 3.175 mm	94.767	41.379	19.6
S304-R188	Open	0.25″ \| 6.35 mm	0.5″ \| 12.7 mm	0.125″ \| 3.175 mm	276.294	106.782	17.5
S304-R4	Open	0.25″ \| 6.35 mm	0.625″ \| 15.875 mm	0.196″ \| 4.978 mm	377.736	149.493	15.75
S304-1602	Open	0.25″ \| 6.35 mm	0.6875″ \| 17.463 mm	0.25″ \| 6.35 mm	190.5	72	2.1
S304-R4A	Open	0.25″ \| 6.35 mm	0.75″ \| 19.05 mm	0.2188″ \| 5.558 mm	595.302	214.896	15.05
S304-R1810	Open	0.3125″ \| 7.938 mm	0.5″ \| 12.7 mm	0.1562″ \| 3.967 mm	138.816	66.738	16.8
S304-1603	Open	0.3125″ \| 7.938 mm	0.875″ \| 22.225 mm	0.2812″ \| 7.142 mm	223.5	93	2.1
S304-1605	Open	0.3125″ \| 7.938 mm	0.9062″ \| 23.017 mm	0.3125″ \| 7.938 mm	223.5	94.5	2.1
S304-1604	Open	0.375″ \| 9.525 mm	0.875″ \| 22.225 mm	0.2812″ \| 7.142 mm	225	96	2.1
S304-R6	Open	0.375″ \| 9.525 mm	0.875″ \| 22.225 mm	0.2188″ \| 5.558 mm	850.242	341.7	13.3
S304-1606	Open	0.375″ \| 9.525 mm	0.9062″ \| 23.017 mm	0.3125″ \| 7.938 mm	225	96	2.1
S304-1614	Open	0.375″ \| 9.525 mm	1.125″ \| 28.575 mm	0.375″ \| 9.525 mm	342	156	2.1
S304-1607	Open	0.4375″ \| 11.113 mm	0.9062″ \| 23.017 mm	0.3125″ \| 7.938 mm	304.5	129	2.1
S304-1615	Open	0.4375″ \| 11.113 mm	1.125″ \| 28.575 mm	0.375″ \| 9.525 mm	343.5	159	2.1
S304-1620	Open	0.4375″ \| 11.113 mm	1.375″ \| 34.925 mm	0.4375″ \| 11.113 mm	507	240	2.1
S304-1616	Open	0.5″ \| 12.7 mm	1.125″ \| 28.575 mm	0.375″ \| 9.525 mm	345	135	2.1
S304-R8	Open	0.5″ \| 12.7 mm	1.125″ \| 28.575 mm	0.25″ \| 6.35 mm	344.7	153.3	11.2
S304-1621	Open	0.5″ \| 12.7 mm	1.375″ \| 34.925 mm	0.4375″ \| 11.113 mm	510	244.5	2.1
S304-1622	Open	0.5625″ \| 14.288 mm	1.375″ \| 34.925 mm	0.4375″ \| 11.113 mm	513	247.5	2.1
S304-1623	Open	0.625″ \| 15.875 mm	1.375″ \| 34.925 mm	0.4375″ \| 11.113 mm	516	250.5	2.1
S304-R10	Open	0.625″ \| 15.875 mm	1.375″ \| 34.925 mm	0.2812″ \| 7.142 mm	475.5	220.5	8.75
S304-1628	Open	0.625″ \| 15.875 mm	1.625″ \| 41.275 mm	0.5″ \| 12.7 mm	630	328.5	2.1
S304-1633	Open	0.625″ \| 15.875 mm	1.75″ \| 44.45 mm	0.5″ \| 12.7 mm	630	336	2.1

Open
Product Number	Seal Type	Bore Dia	Outer Dia	Width	Dynamic	Static	Max
		(d)	(D)	(B)	radial	radial	Speed
					(Newtons)	(Newtons)	(X1000 RPM)
S316-R133	Open	0.0938″ \| 2.381 mm	0.1875″ \| 4.763 mm	0.0625″ \| 1.588 mm	64.068	19.576	47.5
S316-R1-5	Open	0.0938″ \| 2.381 mm	0.3125″ \| 7.938 mm	0.1094″ \| 2.779 mm	188.648	56.948	35.5
S316-R144	Open	0.125″ \| 3.175 mm	0.25″ \| 6.35 mm	0.0937″ \| 2.38 mm	96.104	30.256	40
S316-R2-5	Open	0.125″ \| 3.175 mm	0.3125″ \| 7.938 mm	0.1094″ \| 2.779 mm	190.424	56.948	33.5
S316-R2	Open	0.125″ \| 3.175 mm	0.375″ \| 9.525 mm	0.1562″ \| 3.967 mm	215.34	69.408	33.5
S316-R2-6	Open	0.125″ \| 3.175 mm	0.375″ \| 9.525 mm	0.1094″ \| 2.779 mm	217.12	72.968	31.5
S316-R2A	Open	0.125″ \| 3.175 mm	0.5″ \| 12.7 mm	0.1719″ \| 4.366 mm	217.12	72.968	31.5
S316-R155	Open	0.1563″ \| 3.969 mm	0.3125″ \| 7.938 mm	0.1094″ \| 2.779 mm	122.796	48.052	31.5
S316-R156	Open	0.1875″ \| 4.763 mm	0.3125″ \| 7.938 mm	0.1094″ \| 2.779 mm	122.796	48.052	31.5
S316-R166	Open	0.1875″ \| 4.763 mm	0.375″ \| 9.525 mm	0.125″ \| 3.175 mm	242.036	87.204	30
S316-R3	Open	0.1875″ \| 4.763 mm	0.5″ \| 12.7 mm	0.1562″ \| 3.967 mm	443.14	156.612	25
S316-R3A	Open	0.1875″ \| 4.763 mm	0.625″ \| 15.875 mm	0.196″ \| 4.978 mm	503.648	199.324	22.5
S316-1601	Open	0.1875″ \| 4.763 mm	0.6875″ \| 17.463 mm	0.25″ \| 6.35 mm	240	88	3
S316-R168	Open	0.25″ \| 6.35 mm	0.375″ \| 9.525 mm	0.125″ \| 3.175 mm	126.356	55.172	28
S316-R188	Open	0.25″ \| 6.35 mm	0.5″ \| 12.7 mm	0.125″ \| 3.175 mm	368.392	142.376	25
S316-R4	Open	0.25″ \| 6.35 mm	0.625″ \| 15.875 mm	0.196″ \| 4.978 mm	503.648	199.324	22.5
S316-1602	Open	0.25″ \| 6.35 mm	0.6875″ \| 17.463 mm	0.25″ \| 6.35 mm	254	96	3
S316-R4A	Open	0.25″ \| 6.35 mm	0.75″ \| 19.05 mm	0.2188″ \| 5.558 mm	793.736	286.528	21.5
S316-R1810	Open	0.3125″ \| 7.938 mm	0.5″ \| 12.7 mm	0.1562″ \| 3.967 mm	185.088	88.984	24
S316-1603	Open	0.3125″ \| 7.938 mm	0.875″ \| 22.225 mm	0.2812″ \| 7.142 mm	298	124	3
S316-1605	Open	0.3125″ \| 7.938 mm	0.9062″ \| 23.017 mm	0.3125″ \| 7.938 mm	298	126	3
S316-1604	Open	0.375″ \| 9.525 mm	0.875″ \| 22.225 mm	0.2812″ \| 7.142 mm	300	128	3
S316-R6	Open	0.375″ \| 9.525 mm	0.875″ \| 22.225 mm	0.2188″ \| 5.558 mm	1133.656	455.6	19
S316-1606	Open	0.375″ \| 9.525 mm	0.9062″ \| 23.017 mm	0.3125″ \| 7.938 mm	300	128	3
S316-1614	Open	0.375″ \| 9.525 mm	1.125″ \| 28.575 mm	0.375″ \| 9.525 mm	456	208	3
S316-1607	Open	0.4375″ \| 11.113 mm	0.9062″ \| 23.017 mm	0.3125″ \| 7.938 mm	406	172	3
S316-1615	Open	0.4375″ \| 11.113 mm	1.125″ \| 28.575 mm	0.375″ \| 9.525 mm	458	212	3
S316-1620	Open	0.4375″ \| 11.113 mm	1.375″ \| 34.925 mm	0.4375″ \| 11.113 mm	676	320	3
S316-1616	Open	0.5″ \| 12.7 mm	1.125″ \| 28.575 mm	0.375″ \| 9.525 mm	460	180	3
S316-R8	Open	0.5″ \| 12.7 mm	1.125″ \| 28.575 mm	0.25″ \| 6.35 mm	459.6	204.4	16
S316-1621	Open	0.5″ \| 12.7 mm	1.375″ \| 34.925 mm	0.4375″ \| 11.113 mm	680	326	3
S316-1622	Open	0.5625″ \| 14.288 mm	1.375″ \| 34.925 mm	0.4375″ \| 11.113 mm	684	330	3
S316-1623	Open	0.625″ \| 15.875 mm	1.375″ \| 34.925 mm	0.4375″ \| 11.113 mm	688	334	3
S316-R10	Open	0.625″ \| 15.875 mm	1.375″ \| 34.925 mm	0.2812″ \| 7.142 mm	634	294	12.5
S316-1628	Open	0.625″ \| 15.875 mm	1.625″ \| 41.275 mm	0.5″ \| 12.7 mm	840	438	3
S316-1633	Open	0.625″ \| 15.875 mm	1.75″ \| 44.45 mm	0.5″ \| 12.7 mm	840	448	3